2000 lb Trailer Jack Drop Leg Foot Plate

Trailer Jack Foot Plate · GD-LF-AS001

2000 lb Zinc-Plated Trailer Jack Drop Leg with Integrated Round Foot Plate

GD-LF-AS001 is a trailer-jack accessory with a published maximum payload of 2000 lb, a 15 × 15 × 50 cm overall size and a zinc-plated finish.

The exact product images verify a long round tubular leg, multiple cross-holes along the tube for selectable installed positions, a welded round foot plate and a bright zinc-finish appearance. This architecture aligns more closely with the current market term trailer jack drop leg than with a short detachable footplate alone.

Exact GD-LF-AS001 product image showing the tubular drop leg, multiple cross-holes and integrated round foot plate.

Maximum Payload Boundary

2000 lb Is the Published Accessory Maximum Payload—not a New Rating for the Complete Jack System

The supplied data states Max Payload: 2000 LBS. This page preserves that wording and does not relabel it as lift capacity, static support capacity or trailer GVWR. When installed, the usable system limit is governed by the lowest-rated relevant component and the actual fit between the drop leg, jack tube and retaining hardware.

Drop-Leg Architecture

A Long Tubular Extension Distinguishes This Product from a Simple Replacement Footplate

The exact images show a substantial tube extending upward from the round foot. Current trailer-jack accessory catalogs use drop leg for this long adjustable extension format, while short plate-only accessories are normally called jack foot or footplate.

This distinction matters for B2B sourcing because buyers need to match the leg to the receiving jack tube, retention method and available insertion depth—not just the size of the ground plate.

GD-LF-AS001 zinc plated tubular trailer jack drop leg and round base foot — Low-angle exact-product view showing the long tubular leg welded to the round ground-contact foot.

GD-LF-AS001 trailer jack drop leg multiple adjustment pin holes detail — Exact-product crop highlighting the multiple cross-holes along the tubular leg.

Selectable Installed Positions

Multiple Cross-Holes Provide the Visible Geometry for Pin-Position Adjustment

The tube visibly includes several cross-holes at different heights. This supports an adjustable drop-leg application where the installed length can be selected by aligning a compatible jack hole and retaining pin.

Hole diameter, hole-center spacing, pin diameter, number of approved adjustment positions and insertion depth are not supplied in the current specification and are therefore not published as numeric fit data.

Integrated Round Foot

The Welded Foot Plate Spreads the Jack Contact Beyond the Tube End

The round plate creates a larger ground-contact area than the open end of the tube alone. This is the basic functional reason current jack-foot and drop-leg products use an integrated foot: they create a more practical support interface for the jack on the ground.

The supplied overall size is 15 × 15 × 50 cm. Because no dimensional drawing defines the reference points, this page does not automatically relabel the first 15 cm value as the certified foot diameter or the 50 cm value as exact tube-only length.

GD-LF-AS001 round trailer jack foot plate and welded tube connection detail — Exact-product crop of the round ground plate and tube-to-foot connection.

Zinc-Plated Finish

Zinc Plating Is the Published Surface Treatment

The product brief identifies the finish as Zinc Plated. Current trailer-jack accessory products also commonly use zinc or clear-zinc finishes to improve corrosion resistance on exposed jack-foot hardware.

No plating thickness, salt-spray duration, zinc type, passivation chemistry or marine-grade corrosion rating is supplied for GD-LF-AS001.

Compatibility Is Geometric

Match the Receiving Jack Tube and Pin Geometry Before Treating the Foot as Compatible

A drop leg must slide into the intended jack tube with enough clearance to move but without excessive looseness. The retention holes also need to align with the jack and pin system.

The current specification does not state tube outside diameter, receiving-jack inside diameter or pin size. The page therefore does not claim universal compatibility with all 2,000 lb trailer jacks.

Published Specification

GD-LF-AS001 Data Boundary

Product TypeTrailer jack drop leg / foot plate accessory

Published Size15 × 15 × 50 cm

Maximum Payload2000 lb

Surface TreatmentZinc plated

Adjustment HolesMultiple holes visible; spacing not published

Tube DiameterNot published

Pin / ClipNot confirmed in supplied specification

GD-LF-AS001 FAQ

Buyer Questions for the 2000 lb Drop-Leg Foot

Is this just a trailer jack foot plate?

It includes a foot plate, but the exact product image also shows a long perforated tube. Functionally it is better described as a trailer jack drop leg with an integrated foot plate.

What is the maximum published payload?

2000 lb as supplied. The page does not convert that figure into a separate lift or static-support rating.

What is the size?

The supplied overall size is 15 × 15 × 50 cm. Reference-point definitions require a production drawing.

Is it zinc plated?

Yes. Zinc plated is the supplied surface treatment.

Will it fit any 2,000 lb jack?

Not automatically. Tube diameter, receiving-jack ID, hole alignment and pin geometry must be checked before compatibility is confirmed.

GOODIN Manufacturing

Production Visibility for Trailer-Jack Accessories and OEM Programs

GOODIN supports B2B sourcing with real production, component-handling and workshop inspection visibility. Product-specific tube fit, pin geometry, weld criteria, load verification and plating requirements should still be confirmed against current production documentation.

GOODIN manufacturing and production facility

GOODIN workshop inspection and assembly environment

GOODIN Brand Presence

Trademark Registration Across Key Markets

GOODIN maintains trademark registrations in multiple markets as part of its international brand and distribution presence.

Australia

United Kingdom

European Union

Trademark registration indicates brand ownership/registration status and does not constitute load certification, trailer-jack certification or regulatory approval for GD-LF-AS001.

B2B Trailer Jack Foot RFQ

Specify Jack-Tube Fit and Pin Geometry Together with the 2000 lb Requirement

For quotation, provide receiving jack model or inner-tube dimensions, required drop-leg outside diameter, insertion depth, hole spacing, pin diameter, foot dimensions, required maximum payload, zinc-plating requirement, inspection criteria, order quantity and destination market.

Trailer Jack Foot Application Profile

Use GD-LF-AS001 as an Adjustable Drop-Leg Foot Only after Tube and Pin Compatibility Are Confirmed

GD-LF-AS001 combines a long perforated leg with an integrated round foot. Its application is not determined by the 2000 lb figure alone: the leg must physically match the receiving trailer jack and its retention hardware.

GD-LF-AS001 adjustable trailer jack drop leg foot for compatible 2000 lb jack applications — Exact product geometry used to evaluate tube fit, adjustment positions and ground support.

Tube Fit First

Measure the Receiving Jack Before Ordering the Drop Leg

Current drop-leg products are normally specified by receiving-jack tube size, drop-leg outside diameter, pin size and hole spacing. A matching load class does not guarantee a mechanical fit.

For GD-LF-AS001, these interface dimensions should be confirmed from the production drawing or sample before an OEM or replacement program is approved.

Adjustment Range

Use Only Hole Positions That Keep Adequate Engagement Inside the Jack Tube

The multiple visible holes provide selectable installed positions, but the amount of tube that must remain engaged inside the jack is not published. Do not assume that every visible hole is approved for every receiving jack.

The correct installed position should preserve structural engagement while reducing unnecessary screw travel during hitching or unhitching.

GD-LF-AS001 multiple drop leg pin holes for trailer jack adjustment — Multiple cross-holes are visible; approved hole spacing and minimum insertion remain production-data items.

Ground Contact

Foot Area Helps Support the Jack, but Ground Strength Still Matters

A wider foot reduces contact pressure relative to a bare tube end, but soft soil, loose gravel, mud or sloped ground can still allow movement or settlement.

Use a suitable support pad or firmer surface when the ground cannot safely carry the jack load. The foot plate should not be treated as a substitute for stable ground conditions.

System Capacity

The Lowest-Rated Part in the Jack / Leg / Pin / Trailer Interface Governs the Assembly

GD-LF-AS001 has a supplied maximum payload of 2000 lb. A complete installation can still be limited by the trailer jack, retaining pin, welds, tube interface, mounting structure or ground condition.

Do not use the foot accessory to upgrade a lower-rated jack beyond its own documented capacity.

Outdoor Exposure

Inspect Zinc-Plated Surfaces Where Abrasion and Sliding Contact Remove Protection First

Drop legs slide inside jack tubes and can accumulate dirt, moisture and wear at the tube surface and adjustment holes. Inspect for corrosion, deformation, enlarged holes and damaged welds during routine trailer service.

Pre-Use Check

Check the Leg, Foot Weld, Hole Edges and Retaining Hardware Before Supporting the Trailer Tongue

Stop use if the leg is bent, holes are elongated or cracked, the foot plate is distorted, the tube-to-foot weld is damaged, or the retaining hardware does not lock correctly.

Formal acceptance/rejection limits should follow GOODIN production documentation and the compatible trailer-jack manufacturer's instructions.

OEM / Distributor RFQ

Send the Receiving Jack Geometry—not Just “2000 lb Foot Plate”

Provide jack model, inner-tube dimensions, required drop-leg OD, insertion depth, hole centers, pin diameter, desired installed positions, foot dimensions, load requirement, finish, test/inspection requirement, quantity and destination market.

2000 lb Trailer Jack Drop Leg Foot Plate | GD-LF-AS001