4 Inch Square LED Trailer Light | GD2060106
A Compact Square LED Lamp with a Red Main Lens and Side-Facing Red Lens
GD2060106 is a 4-inch-class LED trailer light built around a compact square housing. The exact product image shows a red primary lens with multiple LED optical elements and a separate red lens plane on the side of the housing.
This geometry is useful for OEM and replacement programs that need a traditional square trailer-light envelope rather than a 4-inch round recessed lamp. Electrical functions, voltage, handedness, mounting pattern and compliance approvals should be confirmed for the production version before ordering.
“4 Inch LED Light” Defines the Size Class and Light Source—not Every Electrical Function
The current authoritative brief states only 4"LED LIGHT. The visible red front and side lenses support a square combination-light form factor, but stop, turn, tail, side-marker, reflector, license-light, voltage and waterproof/compliance claims require current production data.
Multiple LED Optical Elements Sit Behind a Broad Red Rear-Facing Lens
The exact image clearly shows a cluster of individual circular optical elements behind the red main lens. This identifies the light as an LED assembly rather than a replaceable incandescent-bulb housing.
The image is not used to infer diode count, lumen output, current draw, high/low intensity circuits or photometric compliance.
The Side-Facing Red Lens Is Integrated into the Same Housing
Unlike a simple flat square lamp, GD2060106 visibly includes a second red lens surface at the side of the body. That makes the housing architecture relevant when buyers compare compact combination-lamp layouts.
Whether this lens is certified as a side marker, side reflex reflector, clearance function or another regulated function must be confirmed from the production function table and approval markings.
Confirm the Complete Envelope, Mounting Pattern and Wiring Before Treating “4 Inch” as a Drop-In Replacement
Current market products use “4-inch square” as a recognizable trailer-light size class, but overall housings can extend beyond the nominal four-inch face and can use different stud, flange or surface-mount arrangements.
For GD2060106, production drawings should confirm overall width, height, depth, mounting-centre dimensions, fastener type, rear clearance and wire/connector exit before the lamp is approved as a replacement.
Specify Function, Voltage and Wiring as Separate RFQ Fields
Questions Buyers Should Resolve Before Ordering
Is GD2060106 a round 4-inch trailer light?
No. The exact product image shows a square/rounded-square main light body, so this SKU should not be positioned as a 4-inch round recessed lamp.
Does it provide stop, turn and tail functions?
That function set is common in the current 4-inch square trailer-light market, but it is not stated in the supplied GD2060106 brief. Confirm the production wiring/function specification.
Is the side lens a side-marker light?
A side-facing red lens is visibly present. Its certified function should be confirmed from the approval/function documentation rather than inferred from appearance.
Is it 12 V and waterproof?
Neither voltage nor ingress rating was supplied for this SKU, so those values should be confirmed before publishing or ordering.
Is there a left-hand and right-hand version?
The photograph shows one side-lens configuration, but handedness and any license-plate-light variant have not been verified for GD2060106.
Send the Required Functions and Compliance Market—not Just the Nominal Light Size
For quotation, provide stop/turn/tail/marker/reflector/license-light requirements, system voltage, trailer width/class, left/right configuration, mounting envelope, connector or pigtail requirement, waterproof/IP requirement, DOT/SAE/ECE or other approval requirement, quantity and destination market.
