24 Inch Truck Tool Box, 610 × 430 × 450 mm | GDA005
Package size: 630*450*470mm
Surface treatment: Plain
N.W.: 7KG
610 mm Wide, but Much Deeper and Taller than a Typical Shallow Compact Box
GDA005 has a verified 610 × 430 × 450 mm external envelope, a 7 kg net weight and a Plain surface-treatment field.
Its roughly 24-inch width is relatively compact, but the 430 mm depth and 450 mm height create a very different installation shape from the shallow GDA001 box. Fit should therefore be checked in all three directions rather than by width alone.
GDA005 and GDA001 Are Similar in Width—but Not in Storage Envelope
This makes GDA005 a short-width, deep/tall storage envelope rather than a simple second version of GDA001. The deeper body can be useful where lateral space is limited but vertical/depth space is available—subject to verified mounting and opening geometry.
630 × 450 × 470 mm Adds 20 mm in Every Published Direction
Compared with the 610 × 430 × 450 mm product envelope, the package adds exactly 20 mm to each dimension.
Use the package size for shipping, carton and pallet planning. The 20 mm difference is not evidence of foam thickness, product wall thickness or required installation clearance.
Use 7 kg as the Start of the Installed-Mass Calculation
The supplied N.W. is 7 kg. Brackets, fasteners and stored tools add to that figure once the box is installed.
No internal payload or mounting-load rating is provided, so storage capacity must not be estimated from the empty mass or external dimensions.
Do Not Label GDA005 “Under-Bed” or “Underbody” Until Its Actual Interface Is Verified
A 610 mm wide, deep/tall box is a common envelope in vehicle-mounted storage, but dimensions alone do not prove where GDA005 is designed to mount. Confirm the opening side, reinforced attachment zones, brackets and intended orientation before assigning a structural application label.
Plain Does Not Confirm Aluminum, Steel, Checker Plate or Exterior Corrosion Performance
The only published surface field is Plain. Similar-size market boxes use several materials and finishes, so GDA005's construction must come from its own drawing/BOM rather than from dimensional similarity.
For an exposed vehicle installation, specify the base material, surface process, closure sealing and corrosion environment separately.
Opening Direction Can Matter More than the 610 mm Width
The current brief does not state whether GDA005 uses a lid or front door, nor does it specify hinges, supports, handles, locks, seals or mounting holes.
Those details determine the real access corridor and whether the box can be installed beneath, beside or above other vehicle equipment.
Four Checks Before Ordering GDA005
Is GDA005 a 24-inch truck tool box?
Its published width is 610 mm, approximately 24.0 inches. Use the metric 610 mm value for engineering fit decisions.
Is GDA005 an under-bed truck tool box?
The current specification does not confirm the mounting architecture. Verify the exact GDA005 structure before approving an under-bed or underbody installation.
Is GDA005 waterproof?
No sealing or ingress specification is supplied. Waterproof or weatherproof performance must be confirmed separately.
Does 7 kg define the allowable tool load?
No. It is the published net product weight, not an internal payload rating.
Production Visibility for OEM and Distributor Buyers
For B2B sourcing, dimensions and product weight are only part of the decision. GOODIN provides production, assembly and inspection visibility so buyers can evaluate the supplier behind GDA005 as well as the product specification.
Trademark Registration Across Key Markets
GOODIN maintains trademark registrations in multiple markets as part of its international brand and distribution presence.
Australia
United Kingdom
European UnionTrademark registration indicates brand ownership/registration status and does not constitute product-performance certification, regulatory approval or compliance certification for GDA005.
