Aluminum Underbody Truck Tool Box, 750 × 400 × 250 mm | GDA007

The GDA007 Image Set Shows Mirrored Bodies—not One Universal Sloped Box

The product photography shows two mirror-image configurations with the sloped end reversed from one box to the other. That is typical of handed under-tray packaging where the installation geometry differs across the vehicle.

Ordering note: confirm Left Hand, Right Hand or a required pair/set in the RFQ. The image set proves that handed versions exist; it does not by itself prove that both boxes are included in one sales unit.

Do Not Compare 750 × 400 × 250 and 760 × 260 × 420 Axis-by-Axis

The published product size is 750 × 400 × 250 mm while the package is listed as 760 × 260 × 420 mm. The product and package strings use a different orientation/order for the shorter two spans.

For logistics, the three physical package spans can be normalized as 760 × 420 × 260 mm against the 750 × 400 × 250 mm product envelope. Preserve the original supplier fields in ERP/CMS and do not convert the difference into a wall, foam or installation-clearance specification.

Checker Plate Is Visible; Alloy and Sheet Thickness Still Need the Drawing/BOM

GDA007 sits in the aluminum-box product archive and the exact model images visibly show aluminum checker plate. The supplied surface-treatment field remains Plain.

Plain should not be interpreted as smooth sheet, anodized aluminum, powder coating or a specific mill finish. Alloy/grade and sheet thickness are not supplied and should not be copied from similarly sized market products.

Mount for the Loaded Box, Not Only the 5.5 kg Empty Shell

The published N.W. is 5.5 kg. Installation hardware and the actual tools or parts stored inside add to the mass carried below the tray/body.

No internal payload or bracket load rating is provided, so neither storage capacity nor mounting capacity should be inferred from empty weight.

Questions to Resolve Before Ordering GDA007

Production Visibility for OEM and Distributor Buyers

For B2B sourcing, fit and access geometry are only part of the decision. GOODIN provides production, assembly and inspection visibility so buyers can evaluate the supplier behind GDA007 as well as the product configuration.

Trademark Registration Across Key Markets

GOODIN maintains trademark registrations in multiple markets as part of its international brand and distribution presence.

Australia

United Kingdom

European Union

Trademark registration indicates brand ownership/registration status and does not constitute product-performance certification, regulatory approval or compliance certification for GDA007.

Choose the Installation Side Before Approving the Box

GDA007 is shown in mirrored left-hand and right-hand configurations. The sloped end reverses between the two versions, so orientation is a first-order fit requirement rather than a cosmetic option.

Use a vehicle/tray drawing to identify the required side and the available 750 × 400 × 250 mm envelope before the purchase order is released.

Underbody Fit Is Not Complete Until the Door Can Drop and the Operator Can Reach the Latch

The front door swings downward and is restrained by side chains. The installation must therefore preserve door travel, ground/step clearance and a usable hand path to the recessed latch.

Check the opened door against wheels, mudguards, steps, bumpers, suspension travel zones and any adjacent body hardware rather than evaluating the closed box alone.

A Visible Perimeter Seal Is Not a Substitute for an Environmental Specification

Under-tray locations can see rain, wheel spray, dust, road debris and washdown. The GDA007 image set shows a black perimeter seal around the access opening, but no published ingress rating is supplied.

Specify the required sealing performance, aluminum grade, sheet thickness, drainage approach and corrosion environment in the RFQ when the box will work in exposed service.

Place Frequently Used Tools Where the Drop-Down Door Can Be Reached Safely

The underbody location should allow an operator to unlock, lower and close the front door without reaching through a tire zone or other moving/obstructed area. Keep the selected position compatible with normal inspection and service access.

Use GDA007 When the Project Calls for Handed Underbody Access

Compare other storage architectures through the GOODIN Tool Box range. GDA007 is differentiated by its handed angled body and front drop-down access rather than by box size alone.

Send Side, Clearance and Mounting Data with the GDA007 Enquiry

Provide Left Hand / Right Hand / pair requirement, vehicle or tray drawing, available installation envelope, door-drop clearance, expected stored mass, material/finish confirmation, sealing target, bracket concept, quantity and destination market.

Use GOODIN's contact / RFQ channel for GDA007-specific mounting, alloy/thickness and sales-unit confirmation.