Black Aluminum Truck Tool Box, 575 × 245 × 220 mm | GDA009

GDA009 and GDA001 Share 575 × 245 × 220 mm—but the Finish and Hardware Architecture Differ

GDA009 uses a rectangular black powder-coated checker-plate body, dual front latches and a central top handle. The exact GDA001 image set shows a different body/end profile and latch arrangement with a Plain surface field.

GDA009 is also 0.25 kg heavier at 3 kg versus 2.75 kg. Do not attribute that difference to coating mass, alloy or sheet thickness unless the production BOM confirms the cause.

The Lid Opens from the Top—and the Interior Is Also Visibly Black

The open-product image confirms a top-hinged lid and a black interior surface. No gas strut is visible in the supplied GDA009 image set.

If the box is placed under a shelf, against a vehicle panel or inside a confined storage area, preserve enough overhead and rear clearance for useful lid access.

Treat the Coating as a Defined Finish—not as an Unspecified Performance Rating

Black powder coat is the published surface treatment for GDA009 and is visible across the checker-plate body in the exact product photographs.

The current specification does not state coating thickness, gloss, pretreatment, salt-spray duration, adhesion class, UV resistance or abrasion performance. If any of those matter to a fleet or OEM program, put them into the RFQ as measurable acceptance criteria.

595 × 265 × 240 mm Adds 20 mm to All Three Published Product Spans

Use the package dimensions for carton, pallet and freight planning. The uniform +20 mm difference is not a wall-thickness, coating-thickness, foam or installation-clearance specification.

A Carry Handle Does Not Establish a Permanent Truck-Bed Interface

The center handle supports a portable-storage use case, but the exact GDA009 data does not publish vehicle-mounting holes, brackets or reinforced attachment zones.

For fixed truck, trailer or service-body installation, confirm the mounting interface separately and preserve access to both front latches and the top lid.

Questions to Close Before Ordering GDA009

Production Visibility for OEM and Distributor Buyers

For B2B sourcing, finish and hardware are only part of the decision. GOODIN provides production, assembly and inspection visibility so buyers can evaluate the supplier behind GDA009 as well as the product specification.

Trademark Registration Across Key Markets

GOODIN maintains trademark registrations in multiple markets as part of its international brand and distribution presence.

Australia

United Kingdom

European Union

Trademark registration indicates brand ownership/registration status and does not constitute product-performance certification, regulatory approval or compliance certification for GDA009.

Choose GDA009 When Black Powder Coat Is Part of the Required Product Specification

GDA009 uses the same published 575 × 245 × 220 mm envelope as GDA001, but it is not merely a cosmetic recolor. The exact imagery shows a different rectangular body/hardware layout along with the Black powder coat specification.

This makes the finish itself a useful procurement variable when a distributor, vehicle build or branded equipment program needs a black checker-plate storage box.

Use the Top Handle for Handling Logic—not as a Rated Loaded-Lifting Claim

The box is 3 kg empty and has one centrally mounted lid handle. This supports a portable handling use case for compact tools, recovery items or service equipment.

The current data does not publish a loaded handle rating. Define the expected inventory and total carried mass before standardizing manual handling in a fleet or distributor program.

For Exterior Duty, Convert “Black Powder Coat” into Testable Acceptance Criteria

Powder coating defines the finish process at a high level, but fleet and OEM applications may also require a defined gloss, color tolerance, pretreatment, adhesion, film thickness, salt-spray duration or chip/abrasion performance.

Add only the performance requirements that actually matter to the target environment rather than assuming the black finish automatically satisfies an exterior-weather specification.

Mounting Must Be Designed Separately from the Carry Hardware

No vehicle-mounting interface is published for GDA009. For fixed installation, confirm reinforced attachment zones, bracket design and fastener access while preserving the full top-lid opening and both front latches.

Compare the Finish, Hardware and Geometry—not Only the External Size

Use the GOODIN Tool Box range to compare same-size and adjacent-size products by verified body geometry, finish, opening, carry hardware and intended installation.

Specify the Finish Standard and Closure Requirement

Provide intended environment, portable vs fixed use, expected contents and loaded mass, aluminum alloy/thickness requirement, powder-coat color/gloss/performance target, latch/locking requirement, mounting concept, quantity, packaging and destination market.

Use GOODIN's contact / RFQ channel for GDA009-specific coating, hardware and construction confirmation.