Diamond Plate Truck Tool Box, 725 × 300 × 270 mm | GDA011

GDA011 and GDA010 Share the Same Published Size—but They Are Not the Same Box

Both models publish a 725 × 300 × 270 mm product envelope, a 740 × 320 × 290 mm package and Black powder coat. The exact product images show the construction difference immediately: GDA011 has a checker / diamond tread exterior, while GDA010 has smooth panels.

GDA011 is specified at 6 kg net weight and GDA010 at 11 kg. That 5 kg difference is useful for model identification and handling planning, but it does not prove a difference in alloy, sheet thickness, reinforcement or payload.

Specify the Finish by Requirement—not by Appearance Alone

Black powder coat is part of the supplied GDA011 specification, and the exact imagery is consistent with that finish across the visible diamond-pattern exterior.

No powder chemistry, film thickness, gloss tolerance, adhesion result, salt-spray duration, UV rating or ingress rating is supplied. Buyers with defined outdoor or fleet standards should add the required coating tests to the RFQ rather than converting “Black powder coat” into an unsupported durability claim.

Use 6 kg as the Empty-Box Starting Point, Not as a Payload Rating

GDA011 is specified at 6 kg N.W. before tools, spares, brackets and fasteners are added. The value is useful for shipping, manual-handling and installed-mass calculations.

Internal payload and handle lifting capacity are not published, so neither should be reverse-engineered from the empty weight or from the appearance of the checker plate.

740 × 320 × 290 mm for Freight and Warehouse Planning

Compared with the 725 × 300 × 270 mm product envelope, the published package dimensions add nominal spans of +15 / +20 / +20 mm. Treat those values only as packaging/logistics data; they do not define wall thickness, protective-foam thickness or installation clearance.

Five Checks Before Approving GDA011

Questions Buyers Usually Need Resolved

Production Visibility for B2B Tool-Box Programs

For sourcing decisions, the finished box is only one part of the evaluation. GOODIN provides production, assembly and inspection visibility so buyers can review the supplier and the current GDA011 specification together.

Trademark Registration Across Key Markets

GOODIN maintains trademark registrations in multiple markets as part of its international brand and distribution presence.

Australia

United Kingdom

European Union

Trademark registration indicates brand ownership/registration status and does not constitute product-performance certification, regulatory approval or compliance certification for GDA011.

Choose the Location around Access and Clearance, Not the Product Name Alone

GDA011 provides a compact 725 × 300 × 270 mm storage envelope with top access, a front keyed closure and gas-strut lid support. Those verified characteristics can suit service-vehicle, trailer or workshop storage programs when the installation is engineered around the actual location.

The current product evidence does not define GDA011 as a crossover, underbody, side-mount or tongue box. Treat those mounting roles as application decisions that require separate fitment evidence.

Reserve an Operating Zone around the Hinged Lid and Central Keyed Latch

A storage location that fits the closed 725 × 300 × 270 mm envelope can still fail in daily use if a rack, body panel, spare tire, jack, cargo or wall blocks the lid sweep or front latch.

Approve the actual open-lid position and operator hand clearance before drilling, welding or committing surrounding equipment to the final layout.

The 6 kg Empty Box Is Only the First Line in the Installation Calculation

Add realistic tool, spare-part and equipment weight to the 6 kg N.W., then include brackets and fasteners before checking manual handling, support structure or vehicle/trailer load distribution.

No internal payload rating is supplied. A lower empty weight than GDA010 does not establish a higher or lower allowable stored load.

Translate “Black Powder Coat” into the Acceptance Criteria of the Real Duty Cycle

A protected indoor workshop position and an exposed vehicle or trailer position can require very different finish controls. Where the program specifies exterior use, define the needed pretreatment, color/gloss tolerance, film thickness, adhesion, corrosion and UV criteria. None of those performance values should be assumed from the color/finish field alone.

Standardize the Fields the Photos Cannot Answer

For repeat orders, the RFQ should state whether keying must be common or unique, the required aluminum grade and thickness, any lid-strut service requirement, the mounting-hole or bracket concept, representative loaded mass and finish-performance criteria.

This turns a visually similar storage box into a controlled production specification and prevents buyers from using external dimensions as a substitute for interchangeability.

Compare GDA011 by Construction, Access and Mounting Evidence

Use the GOODIN Tool Box range to compare diamond-plate, smooth-panel, portable, trailer and underbody formats. GDA011 is especially useful as a contrast to GDA010 because the two models share the same external and package dimensions while using visibly different panel construction and different empty weights.

Send the Installation Geometry and Procurement Requirements Together

For GDA011, provide intended vehicle/trailer/workshop location, available closed and open-lid space, expected loaded mass, fixed vs removable installation, required keying, aluminum grade/thickness target, coating-performance requirement, mounting concept, quantity and destination market.

Use GOODIN's contact / RFQ channel to confirm GDA011-specific production details that are not established by the current summary and product photography.