2000 lb Sidewind Trailer Jack with 24 in Extended Height | LF912-2015
Handle Style: Sidewind
Travel Distance: 15"
Bracket Height: 9"
Extended Height: 24"
Description: Black powder coat outer tube, Black powder coat inner tube
N.W.: 4.6KGS
2,000 lb Sidewind Trailer Jack with 24 in Extended Height
LF912-2015 is a 2,000 lb Sidewind trailer jack with a published 24 inch extended height, 15 in travel and a 9 in bracket height.
Both the outer and inner tubes are specified with black powder coat. The page deliberately treats the 9–24 in published height geometry as the product's verified differentiator rather than assuming an A-frame, swivel or other mounting architecture.
Authoritative LF912-2015 Product Data
The current source does not define mounting type, tube diameter, foot/wheel options or separate lift/support ratings.
Compact Bracket Height with a Full 15 in Adjustment Range
LF912-2015 publishes a 9 in bracket height, 15 in of travel and a 24 in extended height. For replacement or OEM work, those three values should be reviewed together rather than treating 15 in travel as a stand-alone fit guarantee.
GOODIN'sTrailer Jack Selection Guide provides broader logic for matching capacity and working geometry to the real trailer.
Reserve Lateral Crank Space in the Final Assembly
The verified Sidewind handle requires usable space beside the jack body. Handle radius and exact operating envelope are not supplied, so final clearance should be checked from the real LF912-2015 assembly and trailer layout.
The 9–24 in Geometry Does Not Prove an A-Frame Mount
Several current 2,000 lb Sidewind products with nearly identical 9 in / 24 in geometry are A-frame jacks. That market pattern is useful for comparison, but it is not LF912-2015 documentation.
Use GOODIN's Trailer Jack Encyclopedia to compare common architectures, then confirm LF912-2015's actual interface from the current drawing or verified product images.
Black Powder Coat on Both Outer and Inner Tubes
The supplied specification explicitly identifies black powder coat on both tube sections. This should remain distinct from GOODIN models that use zinc or clear-zinc inner tubes.
No coating thickness, pretreatment, salt-spray duration or marine certification is supplied, so the page does not convert the finish description into a corrosion-performance guarantee.
Six Checks Before Approving LF912-2015
Match the real vertical load to the published 2,000 lb capacity.
Confirm the measurement reference and the available ground / frame geometry.
Verify that the adjustment stroke covers the intended coupling and support positions.
Check the maximum published position against the real trailer requirement.
Keep the lateral crank path clear of couplers, boxes and other permanent hardware.
Confirm the actual bracket or mounting interface from LF912-2015-specific documentation.
Questions Specific to LF912-2015
Why does the 24 in extended height matter for installation fit?
Extended height is the published upper endpoint of the jack's working geometry. Use it together with the 9 in bracket-height reference and 15 in travel to confirm that the installed jack can reach the required coupling and support positions without exceeding the available trailer geometry.
Is LF912-2015 an A-frame trailer jack?
The supplied specification does not state A-frame mounting. Similar market products use A-frame construction, but LF912-2015 should only receive that label after model-specific confirmation.
Is 9 in the retracted height?
The supplied field is Bracket Height: 9 in. Do not rename it retracted height until GOODIN's drawing confirms the reference.
Are both tubes black powder coated?
Yes. The supplied LF912-2015 specification explicitly lists black powder coat on both the outer and inner tubes.
Production Visibility for OEM and Distributor Buyers
Confirm Capacity, Height Window and Mounting Geometry Together
Send GOODIN the actual jack-position load, trailer/frame drawing, mounting requirement, required support/coupling heights, Sidewind clearance, coating requirement, quantity and destination market.
