28 Ton Dual-Speed Semi-Trailer Landing Gear, 80 Ton Static | LF28-0001
Static Capacity: 80TONS
Size: 700MM
Single Gross Weight: 40KGS
Single package size:110X50X30cm
28 Ton Lift / 80 Ton Static Dual-Speed Semi-Trailer Landing Gear
LF28-0001 is listed by GOODIN as a dual-speed landing gear set with separate 28 ton lift and 80 ton static capacity ratings.
The current exact-model listing also identifies a 700 mm leg drop, giving fleet, trailer-OEM and replacement buyers a clear capacity-and-height starting point before mounting and installation geometry are approved.
Lift Capacity and Static Capacity Must Stay Separate
The working rating published for lifting/height adjustment.
The separate stationary-load rating published for the product.
These figures answer different engineering questions. An 80 ton static rating does not mean the system may lift 80 tons, and the 28 ton lift value should not be substituted for the static rating.
Treat 700 mm as a Leg-Drop Specification—not Overall Height
The supplied product brief says “Size: 700 mm,” and GOODIN’s current exact-model title identifies that 700 mm figure specifically as the leg drop.
Do not use 700 mm as mounting height, total assembly height, screw travel or ground clearance. Those dimensions require their own drawing references.
Dual-Speed Operation Is Verified; Gear Ratios Are Not
GOODIN currently identifies LF28-0001 as a dual-speed landing gear set. In this product class, dual-speed systems allow a faster positioning mode and a lower-speed working mode, but the exact LF28-0001 ratio, handle effort and travel-per-turn values are not included in the supplied specification.
For replacement or OEM integration, confirm the current gearbox data rather than importing ratios from another 28 ton landing-gear system.
40 kg Is a Single Gross-Weight Figure
The published shipping data states a single gross weight of 40 kg and a single package size of 110 × 50 × 30 cm.
Gross shipping weight should not be presented as product net weight. Likewise, a complete-set shipping weight should not be calculated from the single-package figure until the packing configuration is confirmed.
Dimensions Still Needed Before a Drop-In Replacement Decision
The current specification establishes the product class, the two capacity ratings, the 700 mm leg drop and shipping data. It does not publish mounting height, bolt pattern, back plate, bracing arrangement, foot style, gearbox orientation, cross-shaft dimensions, handle geometry or the installed retracted/extended height range.
Those interfaces should be confirmed from the current LF28-0001 drawing before approving replacement interchangeability or a new semi-trailer installation.
Four Questions That Matter Before Ordering
Does the 80 ton static capacity mean LF28-0001 can lift 80 tons?
No. The product publishes a separate 28 ton lift capacity and 80 ton static capacity. Keep the two ratings separate.
Are the 28 ton and 80 ton figures per leg or per set?
The current information identifies LF28-0001 as a landing gear set but does not publish the per-leg/per-set rating convention. Confirm that basis on the current engineering document.
Is 700 mm the total landing-gear height?
No. GOODIN’s current exact-model title identifies the 700 mm figure as leg drop. Overall and mounting heights require separate dimensions.
Is the 40 kg figure the net product weight?
No. The supplied field is “Single Gross Weight: 40 kg,” so it should be treated as packaging/shipping data unless a separate net weight is provided.
