12V Magnetic LED Towing Light | GD2060010

GD2060010 · 12V Magnetic LED Towing Light

A Round Red LED Tow Lamp on a Wide Magnetic Base

GD2060010 is specified as a 12V magnetic LED towing light. The exact product image verifies a round red LED lens mounted above a broad black pedestal-style magnetic base.

This gives the light a portable mounting identity that is fundamentally different from bolt-on, stud-mount or recessed trailer lamps. It is therefore suited to towing-light programs where temporary placement on a compatible ferrous mounting surface is part of the installation concept.

Exact GD2060010 product image: round red LED lamp head, short pedestal and broad black magnetic base.

Package Boundary

The Current Brief Confirms One 12V Magnetic LED Towing Light—not a Specific Kit Contents List

Market products in this category are often sold as two-light kits with wiring harnesses or transmitters. GD2060010's current authoritative brief does not specify quantity, wire length, connector type, left/right lamp pair, storage case or wireless operation. Those details are therefore not published as standard contents.

Round LED Lens

The Front Face Uses Multiple Circular Optical Elements Behind a Red Lens

The exact image verifies a round red lens with multiple distinct optical zones. This supports LED towing-light positioning while preserving a compact, familiar round-lamp form.

The image does not establish LED count, lumen output, stop/tail intensity levels, current draw or photometric approval.

GD2060010 round red LED towing light lens optical element detail — Exact-product crop showing the round red lens and multiple visible optical elements.

GD2060010 broad black magnetic towing light base detail — Exact-product crop of the wide pedestal-style magnetic base.

Temporary Magnetic Mounting

The Wide Magnetic Base Is the Product's Main Installation Differentiator

The base geometry is clearly intended for magnetic attachment rather than permanent bolt-through installation. That can simplify temporary towing-light placement where the mounting surface is flat, clean and magnetically compatible.

Magnetic holding force, scratch protection, vibration retention, maximum road speed and approved mounting-surface requirements are not supplied and should be confirmed in production documentation.

12V Electrical Identity

12V Is Verified; Connector, Wire Length and Signal Functions Still Need Definition

Verified Voltage12V

Light SourceLED

Mounting ConceptMagnetic base

Visible LensRound red lens

ConnectorConfirm production configuration

Wire LengthConfirm production configuration

FunctionsConfirm stop / turn / tail and any marker role

Compliance / IPConfirm destination-market requirement

Mounting Surface Fit

Magnetic Attachment Requires the Trailer Body to Provide the Right Surface

A magnetic towing lamp needs more than available space. The selected mounting area should be magnetically compatible, sufficiently flat, clean, free of loose coating/debris and positioned so the lamp remains visible in the required directions.

Aluminum, fiberglass, plastic and many composite trailer bodies will not provide direct magnetic attachment unless a separately engineered ferrous mounting provision is added.

GD2060010 FAQ

Questions to Resolve Before Ordering

Is GD2060010 a 12V light?

Yes. 12V is explicitly included in the supplied product description.

Is it sold as a pair?

The current brief does not state package quantity, so a two-light kit should not be assumed without current packing data.

Does it include a 4-pin flat plug?

Not confirmed. Four-way flat connectors are common in this market, but GD2060010's connector has not been specified.

Is it wireless?

No wireless function is stated. Do not confuse this wired/unspecified product family with current wireless magnetic towing-light kits.

Can it mount to an aluminum trailer?

Not directly by magnetic attraction unless a compatible ferrous mounting surface or engineered adapter is present.

GOODIN Manufacturing

Production Visibility for OEM and Distribution Programs

GOODIN supports B2B sourcing with real production, component-handling and workshop inspection visibility. Product-specific electrical ratings, approvals and inspection criteria should still be confirmed against current production documentation.

GOODIN manufacturing and production facility

GOODIN trailer parts and components in production

GOODIN workshop inspection and assembly environment

GOODIN Brand Presence

Trademark Registration Across Key Markets

GOODIN maintains trademark registrations in multiple markets as part of its international brand and distribution presence.

Australia

United Kingdom

European Union

Trademark registration indicates brand ownership/registration status and does not constitute product-performance certification, regulatory approval or lighting-compliance certification for this SKU.

B2B Towing Light RFQ

Specify the Complete Temporary-Lighting System Around the Lamp

Provide required lamp quantity, stop/turn/tail functions, 12V vehicle interface, connector type, cable length and gauge, left/right identification, magnetic holding requirement, mounting surface, scratch-protection target, sealing/IP requirement, DOT/SAE/ECE or other approval requirement, quantity and destination market.

Application Profile

Use GD2060010 for Temporary 12V Towing-Light Placement on Compatible Metal Surfaces

Magnetic towing lights are useful when a trailer, dolly or towed vehicle needs removable rear signaling without immediately committing to a permanent lamp mount.

GD2060010's exact image supports this temporary-mount application: the round red lamp head is elevated above a broad magnetic base for rearward visibility.

GD2060010 magnetic LED towing light for temporary trailer and towed vehicle lighting — Exact product geometry used to evaluate temporary magnetic mounting and rearward lamp visibility.

Surface Selection

Confirm Magnet Compatibility Before Treating the Lamp as “Universal”

Steel trailer frames and body panels may offer suitable magnetic locations, but aluminum, stainless grades with low magnetic response, fiberglass, plastic and composite panels may not.

The mounting area must also allow the base to sit fully and avoid sharp curvature, raised ribs or debris that reduces contact.

Cable + Connector Planning

Temporary Lamps Still Need Controlled Cable Routing

If the production version uses a wired harness, route it away from tyres, hubs, suspension, coupler articulation, sharp metal edges and hot components. Provide strain relief so connector or cable load is not transferred into the lamp body.

Because GD2060010's current brief does not state cable length or connector type, the RFQ should define the full tow-vehicle-to-lamp route.

Visibility + Orientation

Place the Round Red Lens Where Cargo, Gates and Bodywork Cannot Mask It

Temporary positioning should preserve the required rear viewing angles and left/right separation. Do not place the lamp behind a mesh gate, spare tyre, machine attachment or raised body edge that blocks the signal.

The exact regulatory placement depends on trailer dimensions and destination market.

GD2060010 round red magnetic towing light lens visibility detail — The round red optical face should remain unobstructed after the magnetic base is positioned.

Retention + Surface Protection

Magnetic Convenience Does Not Eliminate the Need to Validate Retention

Road vibration, wind load, corrugations, paint condition and contamination all influence real magnetic retention. If the application requires a secondary tether, defined pull force or maximum operating speed, those requirements should appear in the product/installation specification.

Road-Lighting Compliance

Confirm the Lamp's Actual Stop / Turn / Tail Functions and Approval Marks Before Road Use

Current 12V magnetic towing-light kits commonly provide red stop, tail and turn functions, but those competitor specifications cannot be transferred to GD2060010 without its own function table and approval data.

Final selection should identify required functions, lamp count, spacing, color, connector, grounding method and approval system for the intended jurisdiction.

OEM / Distributor RFQ

Define the Lamp, Harness and Mounting Surface as One Towing-Light System

Send tow-vehicle voltage, trailer/towed-vehicle type, lamp quantity, required signaling functions, connector, cable lengths, magnetic surface material, required retention, secondary restraint, sealing requirement, regulatory approval and destination market.