Single Axle Off Road Camper Trailer, 750 kg Payload | GD-CT

Quantity:
Contact Now
add to cart
GD-CT
Parameter Configuration Description
Overall dimension: 3000*1600*1450mm (Length × Width × Height)
Box size: 1500*1000*500mm (Length × Width × Height)
Tool box size: 890*405*490mm
Payload: 750kg
Dead load: 526kg
Shock absorption: Independent suspension
Tyre: 235/75R15 Off-road tire
Rim: 15 inch aluminum alloy rims
Guide Wheel Outrigger: 8 inch
Front support legs: 2
Traction: 2"
Braking: Electromagnetic brake
Lamps and lanterns: 12V LED taillight, 7-pin plug
Cooking utensil: Draw integrated stainless steel kitchenware
Cistern: 40L
Roof rack: 1
Spare tire: 1
Tent: NO
Safety chain: 2
Water pump: 1
Battery: No
Surface treatment: Baking varnish
Colour: Light grey / Dark grey (Optional)
GD-CT · Single Axle Off Road Camper Trailer

Compact Off-Road Storage, Kitchen and Water Systems on a 750 kg Payload Platform

GD-CT is a compact single-axle camper-trailer platform with a published 750 kg payload, 526 kg dead load, independent suspension, 235/75R15 off-road tyres and 15-inch aluminum-alloy rims.

The body combines a 1,500 × 1,000 × 500 mm cargo box with an 890 × 405 × 490 mm front tool box, a slide-out stainless-steel kitchen, 40 L cistern, roof rack, spare tyre, front support hardware and 12 V trailer lighting.

GD-CT single axle off road camper trailer with slide out stainless steel kitchen front tool box roof rack and support legs
Exact GD-CT product image showing the compact body, slide-out kitchen, front storage box, single off-road wheel position, roof rack and front support system.
Configuration Boundary

The Product Photography Shows a Rooftop Tent, but the Current Standard Specification States “Tent: NO”

One exact GD-CT image shows a deployed rooftop tent on the roof rack. Because the supplied configuration explicitly states Tent: NO, the tent is treated as display/optional equipment in the imagery—not as a standard included component.

Compact Trailer Envelope

3,000 × 1,600 × 1,450 mm Overall with a 1,500 × 1,000 × 500 mm Main Box

The compact overall envelope is paired with a relatively deep 500 mm storage body. The front tool box is separately specified at 890 × 405 × 490 mm.

For procurement, these three dimensional sets should stay separate: overall towing/storage envelope, main cargo box and front tool-box envelope.

GD-CT 235 75R15 off road tyre and 15 inch aluminum alloy rim rear detail
Exact-product rear crop showing the off-road tyre profile and alloy-wheel design; tyre size and rim diameter come from the supplied specification.
Off-Road Running Gear

Independent Suspension, 235/75R15 Off-Road Tyres and 15-Inch Alloy Rims Define the Mobility Package

The specification identifies independent suspension rather than a conventional leaf-spring beam axle. The road wheel package is 235/75R15 off-road tyre on a 15-inch aluminum-alloy rim.

Do not infer suspension travel, spring type, shock-absorber count, tyre load index, speed rating or rim load rating from the photographs.

Camp Kitchen

A Draw-Out Stainless-Steel Kitchen Converts the Side Storage Zone into a Campsite Work Surface

The product specification lists draw-integrated stainless-steel kitchenware. The exact image verifies a full-width slide-out stainless worktop with sink basin and faucet positioned behind a side access door.

The current data does not specify burner count, gas system, food-grade certification, drawer load rating or kitchen-slide capacity, so those details remain outside the published claim set.

GD-CT slide out stainless steel camper trailer kitchen with sink and faucet
The exact GD-CT image verifies the slide-out stainless kitchen structure, sink and faucet layout.
Water System

40 L Cistern + Water Pump Support a Simple External-Kitchen Water Supply

The published configuration includes a 40 L cistern and one water pump. This aligns naturally with the sink/faucet arrangement visible in the kitchen image.

Tank material, potable-water certification, pump flow rate, pressure, filter system, drain routing and freeze protection are not specified.

GD-CT 8 inch jockey wheel two front support legs 2 inch coupler and drawbar detail
Front system crop showing the jockey wheel, two support-leg positions, drawbar and ball-coupler architecture.
Front Support + Coupling

An 8-Inch Guide Wheel and Two Front Support Legs Separate Manoeuvring from Campsite Stabilisation

GD-CT is specified with an 8-inch guide-wheel outrigger, two front support legs and a 2-inch traction/coupling interface.

The support legs visibly provide separate stationary contact points from the jockey wheel. No vertical/dynamic rating is supplied for either system, so the page does not assign them a lifting or loaded-manoeuvring capacity.

Rear Travel Package

Roof Rack, Rear-Mounted Spare Tyre and 12 V LED Tail Lamps Complete the Exterior Travel Layout

The rear product image clearly shows the centrally mounted spare tyre, folded roof platform/rack assembly and left/right lamp positions. The supplied parameter sheet confirms one spare tyre and 12 V LED taillights with a 7-pin plug.

GD-CT rear spare tyre 12V LED taillights off road tyres and folded roof rack
Exact rear view showing the spare-wheel carrier, rear lamps, off-road road tyres and folded roof-platform assembly.
Brake + Electrical Interface

Electromagnetic Braking and a 7-Pin Connection Must Be Matched to the Tow Vehicle

The trailer uses electromagnetic braking and a 7-pin plug. The current specification does not state brake-drum size, brake-controller type, breakaway battery/system, connector pinout or regulatory approval basis.

Because the trailer itself is supplied without a battery, the product page should not imply an onboard house-battery system, inverter or solar charging architecture.

Body Finish

Baking Varnish with Light Grey or Dark Grey Colour Options

The specified surface treatment is baking varnish, with light grey or dark grey optional colours. This should be kept distinct from GD-CAT's hot-dip-galvanized finish strategy.

The photos show a dark-toned finished body, but they do not establish coating chemistry, pretreatment, dry-film thickness, salt-spray hours or corrosion classification.

Published Configuration

GD-CT Specification at a Glance

Overall3,000 × 1,600 × 1,450 mm
Box1,500 × 1,000 × 500 mm
Tool Box890 × 405 × 490 mm
Payload750 kg
Dead Load526 kg
SuspensionIndependent suspension
Tyre235/75R15 off-road tyre
Rim15-inch aluminum-alloy rim
Jockey Wheel8 inch
Front Support Legs2
Traction2 inch
BrakingElectromagnetic brake
Lighting12 V LED taillight + 7-pin plug
KitchenDraw-integrated stainless-steel kitchenware
Cistern40 L
Roof Rack1
Spare Tyre1
TentNo
Safety Chain2
Water Pump1
BatteryNo
FinishBaking varnish
ColoursLight grey / Dark grey optional
GD-CT FAQ

Buyer Questions That Matter for This Configuration

Is a rooftop tent included?

No. The supplied standard specification states “Tent: NO.” A product photo shows a rooftop tent as a display/fitment example only.

Does 750 kg payload mean 750 kg ATM/GVWR?

No. Payload and dead load are published separately; no certified ATM/GTM/GVWR is supplied here.

Is a house battery included?

No. The current specification explicitly states Battery: No.

What does the 40 L water system include?

A 40 L cistern and one water pump are published. Pump performance, tank material and water certification are not specified.

Is the 2-inch coupling suitable for every off-road articulation requirement?

No such universal claim is made. Coupling rating, articulation range and the intended terrain/duty cycle should be confirmed for each trailer program.

B2B Camper Trailer RFQ

Confirm Mass Ratings, Suspension Detail, Hitch Duty and Optional Fit-Out Before Production

For quotation, send target market, required certified total mass, payload, suspension specification, brake requirement, hitch/coupler rating and articulation needs, tyre/rim ratings, tent requirement, battery/electrical architecture, water-system acceptance criteria, kitchen requirement, colour, coating specification and order quantity.