Black Work Truck Tool Box, 725 × 300 × 270 mm | GDA010
Package size: 740*320*290mm
Surface treatment: Black powder coat
N.W.: 11KG
A Smooth-Panel Black Tool Box with Keyed Access and Gas-Strut Lid Support
GDA010 combines a 725 × 300 × 270 mm aluminum box with Black powder coat, a central keyed front latch and a single gas strut supporting the top-opening lid.
Its smooth exterior panels and professional access hardware set it apart from GOODIN's smaller black checker-plate GDA009. The 11 kg empty mass also makes realistic handling and installed-load planning important for work-truck, fleet and workshop programs.
GDA010 Is Not a Larger GDA009
Both products specify Black powder coat, but the common finish is where the close similarity ends. GDA009 uses checker plate, a lid-mounted carry handle and two front draw latches; GDA010 uses smooth panels, one central keyed latch, gas-strut lid support and recessed side handling hardware.
GDA010 is also 150 mm longer and 8 kg heavier. Those verified differences justify a work-storage positioning rather than a second page competing for the same black-tool-box query.
One Central Gas Strut Supports the Lid in the Open Position
The exact GDA010 images show a single gas strut between the rear interior of the box and the lid. This differentiates the opening system from GDA009, where no gas strut is visible.
The current specification does not publish strut force, cycle life or replacement part number. Fleet buyers who treat the box as service equipment should include those maintenance details in the approval package if required.
A Single Front Locking Point Simplifies Daily Access
GDA010 has one centrally positioned front latch with a visible key cylinder. This supports lockable-storage terminology without assuming a particular security standard.
Key quantity, keyed-alike options, replacement-lock availability and security rating are not supplied. Confirm them when the box will be standardized across multiple service vehicles or distributor programs.
Keep the Side Handle Usable without Treating It as a Structural Mount
A recessed folding/chest-style handle is clearly visible on one side of the exact product. It gives the box a practical handhold for positioning during installation or handling.
The supplied imagery does not establish a rated loaded-lifting capacity or confirm the unseen opposite side, so handling plans should not assume two rated lifting points without current production data.
The Smooth Exterior Is a Real Construction Difference
Unlike the checker-plate surfaces visible on several earlier GOODIN aluminum boxes, GDA010 presents smooth exterior panels under its black powder-coated finish.
Do not use the smooth appearance to infer alloy, sheet thickness or coating performance. Those values must come from the current drawing, BOM and coating specification.
Plan Handling and Mounting around the Loaded System
The published N.W. is 11 kg before tools, parts, brackets or fasteners are added. That is materially higher than the smaller portable boxes in the current GDA sequence.
Do not reverse-engineer material thickness or payload from the 11 kg value. For fixed installation, use the realistic loaded mass and verified attachment zones.
740 × 320 × 290 mm Adds +15 / +20 / +20 mm to the Product Envelope
Use the package dimensions for freight, pallet and warehouse calculations. These differences are not coating thickness, wall thickness, protective-foam thickness or vehicle-installation clearance.
Questions to Resolve Before a GDA010 Program
Why is GDA010 positioned as a work truck tool box?
Its exact structure combines keyed access, gas-strut-supported top opening, recessed side handling hardware and an 11 kg empty mass in a professional rectangular storage format. No specific bed-rail or side-mount architecture is assumed.
Is GDA010 lockable?
Yes. A central front latch with a visible key cylinder is fitted to the exact product. Key count and security rating are not published.
Does the gas strut make the lid self-opening?
The real product shows one gas strut supporting the lid. No opening force, automatic-opening specification or cycle-life data is supplied.
Is the black powder coat weatherproof?
A Black powder coat finish is specified, but no weather, salt-spray, UV or ingress rating is published. Define required coating and environmental performance separately.
Production Visibility for Work-Truck and Distribution Programs
For B2B sourcing, visible hardware is only part of the decision. GOODIN provides production, assembly and inspection visibility so buyers can evaluate the supplier behind GDA010 as well as the current specification.
Trademark Registration Across Key Markets
GOODIN maintains trademark registrations in multiple markets as part of its international brand and distribution presence.
Australia
United Kingdom
European UnionTrademark registration indicates brand ownership/registration status and does not constitute product-performance certification, regulatory approval or compliance certification for GDA010.
