Full Size Truck Tool Box, 1235 × 385 × 385 mm | GDA003
Package size: 1250*400*400mm
Surface treatment: Plain
N.W.: 12.25KG
1235 mm Length Changes the Tool-Storage and Installation Question
GDA003 is the largest verified box in the current GDA001–GDA003 sequence, with a 1235 × 385 × 385 mm external product envelope and 12.25 kg net weight.
At this size, selection should move beyond “does the box fit?” and address the complete installed zone: access, stored-item length, loaded mass, surrounding hardware and the structure that will support the box.
GDA003 Is a Genuine Size Step—not a Parameter-Swap Version of GDA002
| Verified Field | GDA001 | GDA002 | GDA003 |
|---|---|---|---|
| Product size | 575 × 245 × 220 mm | 765 × 335 × 245 mm | 1235 × 385 × 385 mm |
| Net weight | 2.75 kg | 5.55 kg | 12.25 kg |
| Surface field | Plain | Plain | Plain |
Compared with GDA002, GDA003 is 470 mm longer, 50 mm deeper and 140 mm taller, with 6.70 kg more empty mass. Those verified changes justify a different storage and installation review.
Use 1235 mm as an External Fit Dimension—Then Confirm the Real Internal Clear Length
The longer shell makes GDA003 a stronger candidate when a project needs a larger storage envelope, but the published 1235 mm is an external dimension.
Do not promise that a 1235 mm tool, bar or component will fit inside until internal wall, hinge, latch and opening clearances are known.
12.25 kg Is Only the Empty-Box Starting Point
The installed support structure must ultimately carry the 12.25 kg box, mounting hardware and the real inventory placed inside it. A larger external box can invite heavier storage even when no internal-load rating has been published.
Define the intended contents and loaded mass before specifying attachment points or approving a fleet installation.
1250 × 400 × 400 mm Is the Package Envelope—not the Product Fit Envelope
The single package is 15 mm larger than the product in each published dimension. Use 1250 × 400 × 400 mm for logistics planning, while installation fit remains based on the actual product and its verified opening/mounting geometry.
Keep Material and Corrosion Requirements Separate from the Word “Plain”
The supplied specification identifies the surface treatment only as Plain. That does not establish aluminum, steel, checker plate, coating thickness or a weather-exposure rating.
A customer requiring exterior fleet duty should specify base material, finish process, sealing and environmental acceptance separately.
Full-Size Does Not Mean Crossover, Chest, Inside-Bed or Top-Mount
Current truck-tool-box markets use “full size” across several different body and mounting formats. GDA003’s current specification does not identify which format applies.
Confirm the opening style, hinge/support hardware, locks, handles, seals, reinforcement and mounting interface before adding a more specific architecture label to the product.
Questions That Matter at This Size
Why is GDA003 positioned as a full-size truck tool box?
Its verified envelope is substantially larger than GDA001 and GDA002, and full-size truck tool box is an established market size category. The term does not define a specific mounting architecture.
Is the 1235 mm dimension the usable internal length?
No. It is the published external product dimension. Internal clear length requires its own drawing or measurement.
Is GDA003 a crossover or chest box?
That is not established by the current specification. Confirm the actual lid/body and mounting architecture before using either term.
Does 12.25 kg tell us the allowable tool load?
No. Net box weight and stored-item load capacity are different specifications.
Production Visibility for OEM and Distributor Buyers
For B2B sourcing, dimensions and product weight are only part of the decision. GOODIN provides production, assembly and inspection visibility so buyers can evaluate the supplier behind the product as well as the GDA003 specification.
Trademark Registration Across Key Markets
GOODIN maintains trademark registrations in multiple markets as part of its international brand and distribution presence.
Australia
United Kingdom
European UnionTrademark registration indicates brand ownership/registration status and does not constitute product-performance certification, regulatory approval or compliance certification for GDA003.
